The knowledge of the bronzing machine will continue today. Why do you say this? Because Xiao Bian feels that this knowledge is not enough, he still needs to continue to understand, and it is the main product of the website, so it is more important for its learning, can not be sloppy. Underneath, Xiaobian will come to concrete development, hoping to let everyone know more about the hot stamping machine.
When using the bronzing machine, the operator should pay attention to some matters. The specific ones are:
(1) It is strictly forbidden for non-operators to operate the hot stamping machine to prevent problems.
(2) Before starting the machine, perform lubrication work and let the machine idle for three to five minutes to check for problems.
(3) The hot stamping plate should be installed, the bronzing paper should be arranged well, and the bronzing distance should be adjusted to avoid problems.
(4) During the operation of the hot stamping machine, the operator cannot touch the work surface by hand, and the machine cannot be wiped and repaired, and it is not allowed to cross the rotating part. Also, the operator can't laugh around and yell around the machine to avoid accidents.
(5) During the hot stamping process, the operator should concentrate on the hot plate to check for looseness or misalignment.
(6) After the work is completed, turn off the power of the machine, and organize and clean the job site.
In the hot stamping machine, the installation of gold foil paper is also very important, how should it be installed? To answer this question, let's take a brief answer.
Put the gold foil paper into the discharge tray first, and put it gently, and then rotate it clockwise. Pay attention to the correct placement.
In the receiving tray, insert a paper tube to be able to recycle the gold foil. Then pass the gold foil paper under the guide bar and under the print head.
One end of the gold foil paper is fixed on the top of the recovery tray on the receiving tray, and then taped to prevent falling off. Then turn the recovery paper tube clockwise to turn the gold foil paper, and observe the phenomenon of kinking, folding, etc., if it should be treated in time. In this way, the gold foil paper is installed.