The mechanical operation of computer bronzing machine determines the quality of handicrafts will continue to improve, and the quality of bronzing materials can also affect the final effect, so in the choice of bronzing machine and bronzing machine manufacturers need to choose scientifically, not blindly. In the work of the bronzing machine, experienced operators are also very important, the temperature, pressure and speed are very high requirements, in the operation, the temperature needs to be controlled in the specified acceptable range, with constant temperature or other temperatures to make the dyeing resin layer melt to ensure uniform distribution of color. If the temperature is too high it is easy to make printing material paste version, material will also flourish chemical changes and lose its luster, even blistering or dim. And the temperature is too chemical reaction is not enough to cause hot stamping effect is not firm, easy to peel off the surface discoloration.
In addition, consideration should also be given to whether the substrate is suitable for stamping, stamping, stamping, stamping, stamping, clamping, and pad. Finally, look at the environmental conditions, including indoor temperature and humidity, temperature in the substrate, indoor air cleanliness (dust content). In short, the stamping process is a complex technology, in the stamping process, only grasp these problems, in order to obtain the hot stamping effect.
Stamping of aluminum layer transfer must be completed through the pressure impact anodized aluminum stamping pressure of the size of the adhesive. Even if the temperature is correct, if the pressure is not enough, but also can not make hot stamping foil transfer to the substrate, will produce imprinting faint version; On the contrary, if the pressure is too high, the pad and compression deformation of the substrate is too large, and the imprinted hair is thick, even adhesion, paste plate. Hot stamping pressure, should be appropriately reduced to achieve no fading, fastness to adhere to the guidelines.