Before operating the liquid packaging machine, the first thing to do is to prepare: turn on the power supply, open the power switch on the electronic control box, let the packaging machine fully preheat.
Then to do, is to ensure that the packaging machine inside and outside clean, close the drainage valve, if the packaging liquid also check the delivery liquid metal hose is connected.
Also make sure the package rolls are introduced between the side sealing shafts. Is the tray for holding packaging in place?
After that, the operation method of liquid packaging machine is as follows:
1. The packaging machine is fully preheated and the alarm is prompted. Set "set bag length" and "set bag number" according to the amount of liquid medicine and press "start" button to start heating and packaging;
Package several empty bags, press "stop" button to stop, observe the packaging effect of the bag, when hot and good, press "start" button and immediately press "infusion" button infusion liquid.
2. Clean the outside of the machine with a clean cloth. When the packaging machine is not used for a long time, the power supply of the electronic control box should be closed to save energy and extend the life of the packaging machine.
3, with clean water filter device and packaging machine glass bucket, pipe discharge waste water, close the drainage valve, and then add some water to the packaging machine, cut open the bottom mouth of the packaging bag located under the cutting knife shaft;
Press the "clean" button to drain clean water from the injection tube assembly, and then press the "still/adjust" button to stop cleaning.