There are two kinds of fixing methods for bronzing machine hot stamping. One is to use glue, the liquid like toothpaste is compressed in the bottle, and the other is double-sided high-temperature adhesive tape, which is rolled up in paper tube packaging. Both products are There is a market, indicating that the quality is good, some customers are accustomed to using hot stamping glue, some customers like to use double-sided high-temperature adhesive tape, but in production, some customers' hot stamping version will still drop or shift, why?
According to the analysis, the hot plate and bronzing die of the bronzing machine are not cleaned at the time of fixing. Therefore, if you encounter the shift of the bronzing plate, please check whether the bronzing plate and the heating plate are cleaned up. The mold must be cleaned up once, and then replaced with hot stamping glue or double-sided high-temperature adhesive tape. The two fixing methods for bronzing machine hot stamping are as follows:
How to use hot stamping glue:
Firstly, the bronzing machine is heated to 100-200 degrees Celsius, then the surface of the bonded position is cleaned, and the bronzing glue is applied on the surface of the bronzing plate (Note: the thickness should not exceed 0.2 mm), and the surface curing time of the product can be performed. About 1 minute.
How to use double-sided high temperature adhesive tape:
First, the bronzing machine is heated to: 100-200 degrees, and the high-temperature adhesive tape is cut to the same size as the bronzing plate. After the bronzing plate temperature is reached, rub it on the hot plate to make it adhere to the bronzing mold, and then the surface is The self-adhesive paper is torn off and pasted.